Filter
Leather Protector
To maintain the surface, we recommend our Leather Protector. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces from colour fading and will make them supple once more.Amount: 150 ml. This is usually sufficient for the one-time treatment (minimum) of a complete car interior or a set of furniture.; 1litreApplication: Always test any products first on a hidden area in case they affect the colour!Use COLOURLOCK Leather Protector when the leather has dried completely from cleaning or colour refreshment, ideally on the following day. Apply with a soft cloth and let dry without polishing. One application is sufficient. Strained surfaces (heavy use or in sunlit areas) should be treated every three months. Clean before use to prevent dirt sticking to the surface.These products are also suitable for "Cool Leather/SRT (SunReflective Technology) Leather"!
Available Sizes

Content: 150 ml (US$14.00* / 100 ml)

US$21.00*
Details
Leather Shield
Application area: New smooth leather, pigmented or surface-coloured leather in cars, furniture, jackets and handbags. Do not use on porous leathers, suede, or nubuck. Application Always test any products first on a hidden area in case they affect the colour.Moisten a terry cloth slightly with COLOURLOCK Leather Shield, lightly wipe the moistend cloth over the leather and let dry. Do not buff or polish immediately after application. One application is sufficient. Repeat every three months on strained surfaces or heavily used areas. Prior to application, clean off any dirt with COLOURLOCK Mild or Strong Leather Cleaner.These products are also suitable for "Cool Leather/SRT (SunReflective Technology) Leather"!
Available Sizes

Content: 150 ml (US$14.00* / 100 ml)

US$21.00*
Details
Elephant Leather Preserver 125 ml
Ideal for the care of leather which is exposed to the weather, or for conserving extremely dry or antique leather.Designed for treating genuine "Pull Up" furniture leather (oiled leather). Do not use on Bycast or polyurethane-coated (PU) leather.ApplicationAlways test any products first on a hidden area in case they affect the colour.Rub some preserver onto a clean, soft piece of cloth and apply to the leather. If required, use the cloth to give a final polish. The fat is difficult to use when it’s cold, so be sure to work at room temperature or warm it slightly with a hair dryer.COLOURLOCK Elephant Leather Preserver protects and waterproofs all types of nappa leather.

Content: 125 ml (US$16.80* / 100 ml)

US$21.00*
Aniline & Suede Protector
For new aniline or suede leather, we recommend our Aniline & Suede Protector. It protects the leather from drying and bleaching. To guard against stains, the leather should additionally be treated with our COLOURLOCK Waterproofing for nubuck leather and textile clothing. Ideally this should be done within a year, and more frequently afterwards. The waterproofing is always applied last.  Application Always test any products first in a hidden area for changes or colour correctness! Use according to instructions on the label.

Content: 400 ml (US$6.00* / 100 ml)

US$24.00*
Aniline Cream
Aniline Cream offers intensive protection for all fine-pore, matt and sensitive top-grain leathers. To check if your leather is aniline, simply put a small drop of water onto the surface. If it soaks in and darkens the surface, then you will need to protect it against dirt and stains.Amount: 250 ml (sufficient for a complete set of furniture), 1 litreApplication areas: Furniture Leather, Leather ClothingFor: Aniline leather, Pull Up leather, Semi-aniline leatherUsed regularly, COLOURLOCK Aniline Cream provides a strong barrier against all types of stains and soiling. This treatment is best applied at an early stage as a preventative measure as stains that have already been absorbed into the leather are hard to remove without professional help.Typical areas of application: All kinds of fine-pore, matt, porous top-grain leather furniture The Volkswagen Touareg aniline leather All porous garment leather (top-grain leather) Porous top-grain calf shoe leather For glossy aniline leather, use COLOURLOCK Gloss Cream. Coarse-pore or very sensitive aniline leather should be treated with COLOURLOCK Waterproofing for nubuck and textile. Read more about aniline leather here. The Aniline Cream should only be applied to clean leather! Always test any products first on a hidden area in case they affect the colour.  Application Wet a soft, lint-free cloth slightly with the Aniline Cream and apply evenly in a circular motion, from seam to seam, on the leather's surface. Wait about ten minutes and repeat application. New aniline leather should be treated at least three times in order to prevent stains and discolouration. When finished, warm the surface slightly with a hair dryer. This improves the protective effect. Strained surfaces should be treated at least every three months. Clean the leather carefully with COLOURLOCK Aniline Cleaner before each treatment. This is a gentle cleaner but not suitable for nubuck or suede. Slightly moisten a soft, lint-free piece of cloth with the Cleaner and clean in a circular motion from seam to seam - never apply directly on the leather! Soak up moisture and dirt immediately with a suitable cloth. Avoid too much pressure while rubbing. Test on a hidden area first. Please note that drawn-in stains cannot be removed using the Aniline Cleaner (see pictures). In these cases, please ask us for advice.

Content: 250 ml (US$10.56* / 100 ml)

Variants from US$15.60*
US$26.40*
Details
Waterproofing Leather & Textile
The Waterproofing Spray is a gentle anti-stain protection for sensitive nubuck and suede leather as well as textiles. Available in 200 ml and 500 ml cans. Areas of application: Garments, shoes, cushions, bags, saddles, tents etc.ApplicationAlways test any products first on a hidden area in case they affect the colour.Spray on a clean and dry surface horizontally, from a distance of approx. 40 cm, thinly and evenly. Allow to dry. For heavily strained surfaces repeat as necessary. It should also be reapplied after cleaning. Apply according to instructions and warnings on the label.Important: The waterproofing will not make absorbent leather fully water-resistant. It increases protection, but the surfaces nevertheless have to be treated gently.
Available Sizes

Content: 200 ml (US$6.60* / 100 ml)

US$13.20*
Details
Leather Care and Waterproofing Oil
For the care and waterproofing of natural leather on suitcases, bags, straps or saddles, for motorcycle suits and other leather garments with nappa leather (the type where a drop of water rubbed in does not darken the leather), shoes, boots, greasy and oily leathers. Not suitable for suede and nubuck!Amount: 175 ml.Application areas: Leather ClothingFor: Pigmented leather Area of application COLOURLOCK Leather Care and Waterproofing Oil was specially developed by a tannery master. It makes dry leather supple again, protects it from weathering and makes it waterproof.Amount: 175 ml. This is usually sufficient for multiple treatments, even of larger surfaces.  Application Always test any products first on a hidden area in case they affect the colour.Apply sparingly and evenly, in a circular motion, with a sponge or piece of cloth. Do not dilute. If the leather is very dry, repeat the process. Treatment should be re-applied twice a year.

Content: 175 ml (US$12.00* / 100 ml)

US$21.00*
Gloss Cream
Gloss Cream is a care and stain protection product suitable for open-pored, fine-grained, glossy smooth leathers which have a light base protection and do not immediately absorb a drop of liquid. Leathers suitable for the product are found in the furniture sector and in bags or clothing. For safety, always test all care products first in a concealed area for changes. Aniline leathers are open-pored smooth leathers. Such leathers are wonderfully warm and natural, but more sensitive than surface-dyed smooth leathers. Not all aniline leathers are the same. Some leathers have a fine grain and are pre-treated, other leathers are more coarse-pored and absorb any liquid immediately. The gloss cream is suitable only for the fine-pored and glossy aniline leathers which do not absorb a drop of water immediately. Appropriate care is especially important for open-pored leathers in order to make the leather somewhat less sensitive so it can be cleaned more easily. However, the most important protection always remains a careful handling of the natural product, leather. Because of the sensitivity of open-pored leathers, all products must always be tested first in a concealed area! APPLICATION Due to the sensitivity of open-pored leather, all products must always be tested for changes in a concealed area first! Never apply the products directly to the leather, but always rub the cleaner onto a sponge or cloth and the care product into a soft cloth first. Always apply the products in a circular motion from seam to seam to avoid stains or streaks. Gloss Cream For everyday care, we recommend Gloss Cream which is an effective stain protector, increases the gloss level and keeps the leather supple. Gloss Cream should only be applied to clean leather. For soiled leather we recommend Aniline Cleaner. First check the application on a concealed area! Moisten a soft, lint-free cloth with the product and apply it to the leather surface evenly from seam to seam in a circular motion. Allow to soak in briefly (10 min.) and repeat if necessary. New aniline leather should be treated several times in areas heavy use during initial treatment to prevent stains and discoloration. After application, heat the surface slightly with a hair dryer. This increases the protective effect. The desired gloss is only achieved by re-polishing the dried surface. Heavily used areas should be re-treated every three months. For less stressed areas, intervals of 6 to 12 months are sufficient. 75 ml of Gloss Cream is recommended for bags. 250 ml of Gloss Cream is sufficient for an armchair or a set of furniture. For larger leather upholstery surfaces, we also carry the product in liters. The products have a shelf life of several years if stored at room temperature, frost-free and not too warm.

Content: 250 ml (US$10.56* / 100 ml)

Variants from US$15.60*
US$26.40*
Details
Old Leather Softener
Leather hardens through age and also lack of care. If the leather has not been used for a long time the fibres will dry out through lack of movement. Heat also causes leather to shrink. Originally most vehicle leather was the processed vegetable tanned variety which hardens and shrinks at a temperature of about 70 °C (= 158°F). Today processed chrome-tanned hides are used which can withstand temperatures of around 90 °C (= 194°F). The less a leather is re-oiled through care, the lower the temperature at which it will start to shrink.  THE TREATMENT OF HARDENED LEATHERFirst clean the leather with COLOURLOCK Mild Leather Cleaner. Important: Too much moisture can damage antique leather so it is advisable to use a foam, rather than liquid, cleaner and remove the residue with a slightly damp cloth. . Allow to dry naturally and away from heat and sunlight.Next repair cracks and rips with COLOURLOCK Fluid Leather before treating with Leather Softener. This is important as Leather Softener is oil-based, making it difficult for repair products to be absorbed. Apply Leather Softener with a sponge or a soft cloth. For best results, the softener must be applied on the reverse side (the layer facing the cushions on the inside). Because the surface is rougher, it is more receptive to treatment than the smooth side. Unless you are planning on carrying out further upholstery repairs, you are advised not to remove the covers for this treatment as old leather can tear or break easily.Let the leather rest for 24 hours to allow time for it to fully absorb the Leather Softener, then repeat. One litre is sufficient for an entire vehicle area. For individual upholstery parts use 250 ml.Next try and loosen the fibres by kneading the leather with your hands. Continue until the leather feels softer. But be careful as very old and shrunken leather can break easily. While the leather will never be as soft as it once was, you should still see a noticeable improvement. Professionals use a leather-softening tool to soften the leather (see video).After the final application of Leather Softener remove the residue with a soft cloth and let the leather rest for a week before carrying out further treatment and repairs. Before using repair products thoroughly degrease the area with COLOURLOCK Leather Cleaning Spirit.To nourish and protect the leather, use COLOURLOCK Leather Protector and, if the leather is glossy or exposed to the weather, COLOURLOCK Elephant Leather Preserver offers added protection. Depending on the level of use a care treatment should be applied once or twice a year. Further treatments with Leather Softenerare not necessary. Amount: 250 ml. This is usually sufficient for one or two seats and several handbags/smaller suitcases ; 1 litre
Available Sizes

Content: 250 ml (US$8.40* / 100 ml)

US$21.00*
Details
Protector for Artificial Leather and Plastic - Surface Seal and Protection
Faux Leather Protector and conditioner is ideal for use on synthetic leather, leatherette, PVC, vinyl and artificial surfaces dyed and treated to look like leather. Seals the surface and reduces soiling Protects the surface by reducing bleaching and brittleness Does not make the surface glossy Quantity sufficient to treat a whole car interior or furniture suite Amount: 150 ml, 1 litreApplication areas: Car Leather, Furniture LeatherFor: Artificial leatherCOLOURLOCK Faux Leather Protector and conditioner is ideal for use on synthetic leather, leatherette, PVC, vinyl and artificial surfaces dyed and treated to look like leather. It can also be used on plastic surfaces, such as car dashboards. Apply a thin layer with a soft piece of cloth and let dry without polishing. One layer is sufficient. Repeat every three months on strained surfaces. Clean before use to avoid soiling.
Available Sizes

Content: 150 ml (US$14.00* / 100 ml)

US$21.00*
Details
Textile Waterproofing Spray
Textiles become soiled or stained over time. With the Textile Waterproofing, high-quality fabrics are protected against new soiling. Available Variations: 500 ml ; 1 Litre Areas of Application: Auto, Furniture500 ml of Textile Waterproofing is sufficient for several sets of furniture or fabric fittings of vehicles. The 1-litre refill bottle for the 500 ml bottle is recommended for more frequent textile cleaning. APPLICATION Always test all products first on a concealed area or on a small surface, dosing sparingly.To reduce future soiling and stains, protect the surface with our Waterproofing. The Textile Waterproofing is a gentle stain protection for all textile furniture and automobile covers. Always test on a concealed area first to make sure it causes no colour changes. Release the catch under the spray head, spray thinly and evenly and horizontally onto the clean and dry surface from a distance of approx. 40 cm. Then allow to dry. If necessary, spray heavily stressed surfaces again after drying. Renew the application after cleaning, stain removal or washing. Important! Waterproofing is not a full protection against stains. The most important protection is careful handling of high-quality textiles!
Available Sizes

Content: 500 ml (US$5.52* / 100 ml)

US$27.60*
Details
Leather Sole Oil
The leather sole oil is the ideal leather care product for welted shoes with leather soles. Leather soles come in contact with moisture and must be maintained accordingly. The leather sole oil keeps the leather flexible, waterproofs it and increases the abrasion resistance of the sole.Amount: 150 ml. One bottle is sufficient to treat several pairs of shoes several times.APPLICATIONShake before use.Break-in new soles first so that the fiber structure of the outersole gets a bit rough and becomes receptive to the product. When using for the first time, apply the leather sole oil sparingly and evenly two to three times without completely soaking the leather. Apply with a cloth or brush until the sole is saturated. Repeat one-coat application two to four times a year. Caution: Leather oil can cause stains on porous upper leather.Attention!• If there are visible seams on the leather sole, please skip this area so that no oil gets into the shoe.• Do not overapply! Avoid oversaturating the sole, so that the oil does not go inside the shoe.• Do not treat the sole edge to avoid oil stains on the upper leather.• Porous leather soles are more sensitive to weather than rubber soles. Therefore wear weather-resistant footwear for snow and continuous rain instead of leather soled shoes.• This product is designed for outer shoe soles, it is not suitable for insoles.

US$21.00*
PU Protector
PU leather is cheaper than standard leather, which is what makes it attractive, but is not as durable. It relies on the polyurethane coating for stability. This coating makes the leather feel colder than standard leather and it is more likely to stick to the skin.The polyurethane coating requires special care – normal leather care products will not penetrate, while the classic wax and oil treatments will cause damage. PU leather is also very sensitive to contact from skin and hair and can easily crack, which is why it needs to be cleaned and maintained regularly.Use a lint-free dry or slightly damp cloth to dust the surface. Then, every 3 to 6 months, apply COLOURLOCK PU Protector gently with a soft cloth. This will remove dirt and keep the surface smooth and glossy.Deep scratches and abrasions are difficult to treat. Sometimes light scratches can be removed by heating with a hair dryer. The PU coating has to be heated well to remove the scratches. In most cases, the scratches disappear almost completely. But this has to be done with extreme caution as excessive heating can cause irreparable damage to the coating. It’s advisable to test first by making similar scratches – but not too deep – on a hidden area. Where possible, areas that come into contact with skin and hair should, in addition to regular cleaning and treatment with PU Protector, be protected by pillows and blankets. Damaged PU coatings (matt, sticky, rough or cracked) can rarely be repaired. The options are to have the PU leather replaced by an upholsterer or buy new furniture. 
Available Sizes

Content: 150 ml (US$14.00* / 100 ml)

US$21.00*
Details
PEOX Antifriction Coating
PEOX is a water-based paste which dries transparently to create a durable protective film. It is used on invisible areas to prevent squeaking noises and reduce wear from friction. The product should be applied in a thin layer on contact areas using a piece of cloth. For visible areas, or on surfaces prone to rust, use LEISOL quiet cream. Noise in vehicles has decreased significantly by more modern engines and noise insulation systems. In contrast, the percentage of moving parts in the vehicle has increased considerably. The seats can be adjusted in many variations, cup holders, toggle switches, and much more can lead to disturbing creaking, squeaking or rattling noises. In many years of working with the luxury segment of the automotive industry, LEDERZENTRUM GmbH has developed a range of anti-friction coatings that successfully eliminates these noises. During the development of the LIP ANTI-FRICTION COATINGS, two universal products have been developed which are the first choice in noise reduction for workshops, customer services and consumers. Both products are easy to use, create a transparent, durable, elastic, protective film which doesn't bind soil particles. Another benefit is the reduction in wear and tear. Friction sounds are always a sign of wear and tear! THE PREPARATION First, find the source of the noise. Ask for help if the area is not easy to identify. Often it’s necessary to uncover the affected area. This may require disassembling parts. Clean the area before application. Use PEOX on invisible areas and LEISOL for visible but inaccessible parts. Rub some PEOX into a cloth and apply on the respective surfaces and let dry. Please note that PEOX can cause corrosive surfaces to rust. Also don’t apply on acrylic glass or safety-relevant parts like braking systems, etc. PEOX ANTI-FRICTION CREAM PEOX ANTI-FRICTION CREAM is a water-based paste which dries to a transparent and durable protective film. Areas of application: Rust-proof guide rails, lever guides, hinges, switches, threads. Contact materials: Plastic, artificial leather, leather and fabrics, including micro-fibre fabrics.Cleaning: Excess residue can be removed with a damp cloth moistened with hot water.
Available Sizes

Content: 75 ml (US$20.80* / 100 ml)

US$15.60*
Details
Aniline Protector Spray Pump
The Aniline & Suede Protector is a care product with a complex UV-filters and antioxidants. It protect absorbent leather (Nubuck, Suede, Buffalo and Aniline Leather) from fading by sun and drying out. Regular care increases the gloss and lifespan of your leather.Amount: 200 mlApplication areas: Car Leather, Furniture Leather, Shoes, Bags & Accessories, Leather ClothingFor: Aniline leather, Semi-aniline leather, Suede and nubuck leatherThe COLOURLOCK Aniline & Suede Protector is a care product with a complex UV-filters and antioxidants. It protect absorbent leather (Nubuck, Suede, Buffalo and Aniline Leather) from fading by sun and drying out. Regular care increases the gloss and lifespan of your leather.

Content: 200 ml (US$12.00* / 100 ml)

US$24.00*
LEISOL Quiet Cream 150 ml
LEISOL Quiet Cream prevents creaking noises and reduces wear caused by friction. LEISOL is a liquid lubricating varnish in a pump spray bottle. It can be applied to exposed surfaces and, because of its liquid nature, it is also easy to use in inaccessible areas. For rustproof and non-visible surfaces, use PEOX antifriction coating.Noise in vehicles has decreased significantly by more modern engines and noise insulation systems. In contrast, the percentage of moving parts in the vehicle has increased considerably. The seats can be adjusted in many variations, cup holders, toggle switches, and much more can lead to disturbing creaking, squeaking or rattling noises. In many years of working with the luxury segment of the automotive industry, LEDERZENTRUM GmbH has developed a range of anti-friction coatings that successfully eliminates these noises. During the development of the LIP ANTI-FRICTION COATINGS, two universal products have been developed which are the first choice in noise reduction for workshops, customer services and consumers. Both products are easy to use, create a transparent, durable, elastic, protective film which doesn't bind soil particles. Another benefit is the reduction in wear and tear. Friction sounds are always a sign of wear and tear!

Content: 150 ml (US$20.80* / 100 ml)

US$31.20*