Ideal for leather furniture or leather car seats.Firstly, clean the leather thoroughly before refreshing the colour or applying care products. Use COLOURLOCK Mild Leather Cleaner against normal degrees of soiling or COLOURLOCK Strong Leather Cleaner in extreme cases (where the leather has been neglected for many years, for example classic cars languishing in garages and barns). Cleaning prior to the treatment prevents dirt sticking to the leather's surface when applying colour or care products. Our COLOURLOCK Leather Cleaning Brush effectively removes ingrained dirt. For surface care, we recommend our COLOURLOCK Leather Protector. It contains antioxidants, which stops the leather's decay, and its UV filters protect the leather surface from colour fading and will make the leather soft and supple once more.The kit is usually sufficient to treat a complete car interior or set of furniture multiple times. The Cleaner should only be used on soiled areas, while the Protector should be applied to all surfaces. In the event of extreme soiling, a larger amount of Cleaner might be necessary, but this is very rare. Application Always test any products first on a hidden area in case they affect the colour!COLOURLOCK Leather CleanerThe Leather Cleaner gently cleans all kinds of smooth leather. Apply Cleaner to the Cleaning Sponge and press some foam out of it. Clean the leather and remove dirty foam with a slightly moistened cloth.COLOURLOCK Leather ProtectorUse COLOURLOCK Leather Protector as soon as the leather has dried after cleaning or colour refreshment, ideally on the following day. Apply with a soft cloth and let dry without polishing. One application is sufficient. Strained surfaces (heavy use or in sunlit areas) should be treated every three months. Clean first to avoid dirt or stains.These products are also suitable for "Cool Leather/SRT (SunReflective Technology) Leather"!
Ideal for the care of leather which is exposed to the weather, or for conserving extremely dry or antique leather.Designed for treating genuine "Pull Up" furniture leather (oiled leather). Do not use on Bycast or polyurethane-coated (PU) leather.ApplicationAlways test any products first on a hidden area in case they affect the colour.Rub some preserver onto a clean, soft piece of cloth and apply to the leather. If required, use the cloth to give a final polish. The fat is difficult to use when it’s cold, so be sure to work at room temperature or warm it slightly with a hair dryer.COLOURLOCK Elephant Leather Preserver protects and waterproofs all types of nappa leather.
The Leather Cleaning Brush is ideal for: Using with the Mild or Strong Leather Cleaner to remove ingrained dirt Using with the COLOURLOCK Cleaner for Artificial Leather to remove ingrained dirt from vinyl or plastics Brushing up nubuck and suede Wet pre-cleaning of greasy areas before washing with LEDER FEIN Leather and Fur Wash Concentrate Polishing shoes and boots with COLOURLOCK Elephant Leather Preserver Amount: 1 piece. One brush is usually sufficient for cleaning a car interior or a set of furniture multiple times.With its durable bristles and high-quality wooden handle, the Colourlock Leather Cleaning Brush is great for removing dirt and stains effectively and gently from leather car seats, sofas, chairs, clothing and handbags. It can also be used to clean Alcantara and other Textile materials as long as it is used gently.
Ideal for cleaning leather car and furniture upholstery, bags, suitcases or garments.The Leather Cleaner is provided in a foam dispenser bottle. Foams clean the leather more efficiently than liquid agents, the consumption is considerably smaller, and the leather does not become wet, which could otherwise become hard after drying.Firstly, clean the leather thoroughly before refreshing the colour or applying care products. Use COLOURLOCK Mild Leather Cleaner against normal soiling. Cleaning before treatment prevents the dirt sticking to the leather's surface. Our COLOURLOCK Leather Cleaning Brush effectively removes ingrained dirt (use circular motions and work from seam to seam). After cleaning, it is always best to apply a care product to protect it against general wear and future staining.Amount: 200 ml Mild Leather Cleaner. This is usually sufficient for the cleaning of a whole car interior or set of furniture.Amount: 1 litre Application of Leather CleanerAlways test any products first on a hidden area in case they affect the colour.Dispense some foam on a sponge or brush. Do not apply to the leather directly! Clean the leather from seam to seam using the foam; repeat several times, if necessary. Remove dirty foam residue with a slightly moistened piece of cloth, then allow to dry.On older leathers, stains might sink into the surface, or perceived dirt might actually be colour damage. Such stains cannot always be removed by cleaning, in which case, use COLOURLOCK Leather Fresh for refreshing the colour, or ask us for advice.These products are also suitable for "Cool Leather/SRT (SunReflective Technology) Leather"!
This repair kit is ideal for repairing scratches, abrasions or slight fading on leather furniture or leather car seats.Contents1 x Leather Fresh Dye, 150 ml 1 x Leather Cleaner, 125 ml1 x Leather Protector, 150 ml1 x Sponge for cleaning1 x Sponge for applying fresh dye1 x Polishing Cloth 1 x Protective GloveFirst, clean the leather thoroughly before refreshing the colour or the application of care products. Use COLOURLOCK Mild Leather Cleaner for normal degrees of soiling but, for more serious soiling, you will need COLOURLOCK Strong Leather Cleaner. Cleaning prior to treatment prevents dirt sticking on the leather's surface during colour or care. Our COLOURLOCK Leather Cleaning Brush will remove soiling from the depths of the grain (for best results, use a circular motion in all directions). You can also use the cleaning sponge contained in this kit. After cleaning or, in the case of recently treated or oily leather, de-grease it using COLOURLOCK Leather Degreaser (not contained in the kit).Once the surface has been prepared, apply COLOURLOCK Leather Fresh to revitalise the leather's original colour on scratches, abrasions or slight fading (which are often found in vehicle seat side bolsters and furniture sitting areas). The colour can be prepared according to our colour chart or send us a leather sample by post and we will mix it for you (an additional charge will apply for mixing colour according to a sample).To maintain the top surface, we recommend our COLOURLOCK Leather Protector. It contains antioxidants, that stop the leather's decay, and UV filters to protect the surfaces from colour fading. It will also make the leather soft and supple once again.Application Always test any products first in a hidden area for changes or to confirm colour matching! COLOURLOCK Leather Cleaner The Leather Cleaner is provided in a foam dispenser bottle. Foams clean the leather more efficiently than liquid agents, the consumption is considerably smaller, and the leather does not become wet, which could otherwise lead to hardening after drying.The Leather Cleaner gently cleans all kinds of nappa leather. Apply some foam on the Cleaning Sponge and proceed with cleaning the leather. Remove dirty foam with a slightly moist cloth. COLOURLOCK Leather Fresh Dye After a pre-cleaning with the COLOURLOCK Strong Leather Cleaner (which has a slight re-greasing property) and in case of oily spots, de-grease the leather additionally with COLOURLOCK Leather Degreaser. Wait 1 to 3 hours for the cleaner to dry. Apply the colour after the cleaner has dried.Use a sponge to apply the colour evenly on the respective surfaces, working from seam to seam. Dry afterwards with a hair dryer. On small spots, one application is sufficient. Only treat surfaces where colour change is needed! If high opacity is desired, apply the colour in several layers and dry in-between layers with a hair dryer. COLOURLOCK Leather Protector Wait 24 hrs for cleaning or colouring products to dry completely. Use COLOURLOCK Leather Protector as soon as the leather has dried after cleaning or colour refreshment, ideally on the following day. Apply with a soft cloth and let dry without polishing afterwards. One application is sufficient. Strained surfaces (heavy use or in sunlit areas) should be treated every three months. Clean before in case of soiling! This Product is available in 46 standard colours and special colours according to sample or manufacturer name.
Leather Fresh is a colour refresher (dye) for scratches, worn, or faded leather. Leather Fresh is ideal to refresh colour damages on car leather, furniture leather, leather garments and handbags. Do not use on porous leathers unless colouring the entire surface - it can make the surface appear patchy. It can be sponged on or sprayed using an airbrush.
Always test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. Use Mild Leather Cleaner for normal degrees of soiling or Strong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease using Leather Cleaning Spirit.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, apply Leather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple.
46 standard colours and prepared special colours according to sample or manufacturer name.Find car leather colours for Leather Fresh Dye in our Car Leather Reapair category.
Fluid Leather is only recommended for damage where a filling is necessary. For scratches and general wear-and-tear on the colour surface we recommend smoothing the surface with the COLOURLOCK Leather Sanding Pad and refreshing the colour with COLOURLOCK Leather Fresh. The surface of COLOURLOCK Fluid Leather is smooth and shiny after drying. To hide the repair, apply COLOURLOCK Leather Fresh in the respective colour to the area. This covers the gloss of the COLOURLOCK Fluid Leather. Lightly dab the COLOURLOCK Leather Fresh several times with a sponge on the repair and dry with a hair dryer between layers until the desired covering is achieved. Degrease the repair area with COLOURLOCK Leather Cleaning Spirit in order to remove care product residue. Before starting any repairs with COLOURLOCK Fluid Leather, smooth rough areas and scratches with the COLOURLOCK Leather Sanding Pad For hardened leathers, use COLOURLOCK Fluid Leather before any treatment with COLOURLOCK Old Leather Softener. This oily treatment would reduce the adhesion of the COLOURLOCK Fluid Leather. PROCEDURE Fill the damaged areas with COLOURLOCK Fluid Leather and spread evenly with a spatula. Leave to dry for 1-2 hours, depending on the amount used. Repeat the procedure until the repaired area is as full and smooth as possible. COLOURLOCK Fluid Leather cannot be sanded dry. This would damage the repair.We recommend using the COLOURLOCK GLD Pen to smooth the repair. The GLD Solvent slightly dissolves the surface of the COLOURLOCK Fluid Leather and provides a smoother finish.Open the lid of the COLOURLOCK GLD Pen and press down the felt tip several times until it is moistened. If the felt tip gets too moist, remove the excess quantity by cleaning it with a cloth. Smooth the repair area carefully with the moistened felt tip. When the repair area is wet with GLD, an additional treatment with the COLOURLOCK Leather Sanding Pad can be done to smooth the repair area. Always work with a small amount of GLD to prevent the repair area from becoming too dissolved. Using GLD, a repair can be adjusted to achieve the best possible result.Professionals can repair the graining on a work area using a Repair Grain. Usually, old leathers are smooth and do not need a new graining.The tip of the COLOURLOCK GLD Pen can be removed and reversed when worn. Especially when working on a new colour, it is necessary to change or turn the felt tip upside down.Finally, repairs with COLOURLOCK Fluid Leather must be recoloured with COLOURLOCK Leather Fresh to balance differences in colour and gloss. In order to cover the COLOURLOCK Fluid Leather sufficiently, the COLOURLOCK Leather Fresh should be dabbed onto the area several times and dried between the layers with a hair dryer. After 24 hours treat the leather with Leather Protector. A HOLE WITH MISSING LEATHER Holes should be reinforced before repairing by gluing a thin piece of cloth underneath the hole with COLOURLOCK Leather Glue. Cut out a small piece of the original leather from a hidden area and adjust its shape according to the hole. Use the COLOURLOCK Leather Glue to glue it onto the piece of cloth and the edges of the hole. Close the visible rims with COLOURLOCK Fluid Leather. Leathers with big tears must first be examined in order to decide whether it would be better to replace the weak leather. Especially long tears in old and rough leathers, or in areas of high use, are often irreparable or not durable enough after a repair. We recommend the repair of tears only on stable leathers and only if the tear is no larger than a few centimetres.Procedure: Minor tears which are not under tension should be provisionally glued with COLOURLOCK Leather Glue from edge to edge. Then close the tear with COLOURLOCK Fluid Leather, as explained.Tears under high tension should be backed by thin cloth. In the case of very large tears and/or very rough leathers, it is advisable to sew the leather with a thin but strong thread. Place a seam every 3-4 centimetres with the starting knot on the leather's reverse. Cover the thread with COLOURLOCK Fluid Leather.If the leather is not too rough, drill a small hole to the right and the left of the tear (approximately 2-3 millimetres) and sew with a round needle. Lay the knot underneath and pull the tear together. Tears in areas of frequent use should always be replaced by new leather when they are too large; the same is true for weak or hardened leathers. In cases like these, it is more advisable to replace the leather.
This leather repair kit is suitable for both plain and structured leather, for upholstery on cars or furniture and also leather jackets and other clothing that have light scratches, scuff marks, cracked leather or colour damage. COLOURLOCK Fluid Leather is a coloured filler for deeper scratches and gives a better finish as opposed to normal white fillers. The COLOURLOCK Leather Glue and Backlining Cloth (included) are extremely useful for repairing tears and or rips. Full instructions on how to repair rips, tears scratches, scuffs and colour damage can be found below.Important: Apply the COLOURLOCK Leather Protector a few hours after completing the cleaning, repairing and colouring the leather. Always test all products first on a concealed spot to observe changes and the Leather Fresh for accuracy of colour.
Contents:1 x Leather Cleaner, 125 ml 1 x Leather Fresh Dye, 150 ml 1 x Leather Protector, 150 ml 1 x Leather Shield, 150 ml 1 x Elephant Leather Preserver, 125 ml 1 x Degreaser, 150 ml 1 x Fluid Leather, 7 ml 1 x Leather Glue, 20 ml 1 x Leather Cleaning Brush 1 x Sanding Pad 1 x Spatula 1 x Backlining Cloth 3 x Mini-Brush 1 x GLD-Pen ND 1 x Polishing Cloth Set (2 soft viscose cloths) 1 x Sponge Set (3 sponges)
The COLOURLOCK leather repair set for black steering wheels
is the solution. The bestseller from Germany is now also available in the UK -
with an improved formula and solvent-free!
The leather repair set for steering wheels
contains all important utensils and high-quality materials for the preparation
and repair of black steering wheels. It is used to repair local scratches and
scuffs and to refresh the color. The set of the brand COLOURLOCK, manufactured
in Germany, in the LEDERZENTRUM, contains: