Grain Maker Kit
US$83.82*
To make repairs invisible, an exact imprint of the leather structure must be
pressed into the filling repair products.The COLOURLOCK Grain
Maker Kit is a quickly hardening, two-component product to create Repair
Grains to press a grain structure into the repair area, filled with Filler, Fluid
Leather or Leather & Plastic Paste.
Thermopad Silicone Pad
US$83.82*
The Thermopad is an underlay silicone pad which is used to
hold the COLOURLOCK Repair Grain when it is heated up, as well as used
to press the grain evenly onto the leather's surface to emboss it. This
pad will prevent burning the table when heating it up and your hand when
pressing to emboss.
Made in GermanyProtects your hands from touching very hot repair grain patch when embossingHelps pressing grain patch to achieve an even embossingSize: 10cm diameter x 1cm thickness
Stitch-Covering Gel 20 ml
US$22.69*
With
Stitch-Covering Gel, you cover the
contrasting stitches before colouring. Unlike tape, the gel covers only the
area that is not to be dyed. The Stitch-Covering Gel wraps completely around
the thread and the dye cannot reach the thread from the side. Wait until the
gel is dry, this can take up to 6 hours or use a hair dryer to dry it at about
130 °C for 1 - 2 minutes. Afterwards, the leather can be dyed normally with Leather Fresh or Leather Colour / Top Coat. After dyeing, simply peel off the thread
protection gel.
Furniture
upholstery and car leather often has stitching that contrasts with the base
colour. This also happens with clothing and bags. Dyeing these leather items
while preserving the original colour of the stitches is a challenge. But with stitch-covering
gel and a steady hand, it can be done.
Tips!
The gel is ideal for protecting embroidered lettering or logos from the leather
recolouring process.
For
large areas, you can use the Stitch-Covering Gel as a supplement to the COLOURLOCK Masking Tape for Stitches.
Often stitches
in a different colour from the leather should not be dyed and have to be
protected.
CleanGrip for the black leather cleaning brush
US$24.38*
The CleanGrip is a high-quality accessory for gentle cleaning of smooth leather, suede leather, synthetic leather, and textiles. The grip is specially designed for the large black leather cleaning brush and makes it easier to work with the brush during long and intensive applications.
Suitable for the black leather cleaning brushErgonomic design for long-lasting comfort during cleaning Ideal for long and intensive applications to avoid quick fatigue A non-slip surface that ensures the brush can be held securely even with wet hands. Together with the handle and our black leather cleaning brush, you can effectively and gently clean and care for your leather products.
Instructions:
Hold the CleanGrip firmly in your hand. Insert the back of the brush first into one side of the grip and then snap the brush between your thumb and forefinger into the other recess of the handle. Check that the brush is securely seated in the grip by shaking it lightly or gently pulling on it. Once the brush is securely seated in the handle, you can start cleaning your leather products.
Cover Tape 5 mm x 66 meter
US$76.26*
When re-colouring leather that has stitching threads in contrasting
colour it is important to protect the stitching from absorbing the new
colour. This tape is heat resistant to enable you to dry your colour
with a heatgun without melting the tape. This tape is only 5mm wide, the
perfect width for covering stitching in leather, make sure the tape
covers the stitching entirely so that the dye cannot leech under the
tape and stain the stitching.
Variants from US$28.99*
ColourScannerPRO Measure Device
US$845.48*
for leather repair incl. database, scanner, bag, charging cable, color wheel
What is the biggest problem with repairing leather? We asked our
customers and received the same reply over and over again: How can I
manage mixing the right and fitting leather colour? Until now, the
answer (and the challenge to the craftsman) was: a solid training, a
keen eye for colours and lots and lots of mixing experience. This will no longer be an issue - introducing the ColourScannerPRO! The ColourScannerPRO
is a very compact, Bluetooth®-tethered tool for formula selection which
enables you to scan leather colours and immediately view fitting
formula suggestions – making colour mixing a breeze. The device
will be calibrated by us and comes readily supplied with our up-to-date
formula database, containing more than 500 colours from the automotive
and furniture sector. We are continuously working on expanding this
selection (aiming for 5,000 colours), steadily improving measuring
precision. Simply use your mobile phone (iOS and Android alike)
to measure leather colours, to receive mixing suggestions or to create
new formulas.
Colour Wheel
US$10.08*
The Colour Wheel is an universal tool that shows the relationship
between primary colours. Use it as a guide for colour mixing. We supply
recipe suggestions for most modern car leathers.
Chill Bar
US$318.28*
The Chill Bar helps to evenly press a grain onto the leather,
to cool down repair areas and to remove dents and dings. The flat side is for
flat surfaces and the rounded side for form surfaces.
Made in Germany
Helps pressing embossing of leather grain patterns quickly cooling them down
Double sided for flat and curved surfaces
Size in cm: 11.5 x 8 x 2.5
Heavy metal bar. Weight in kg: 1.4
Application areas: Car Leather, Furniture Leather, Shoes, Bags & Accessories, Leather ClothingFor: Artificial leather, Aniline leather, Refined aniline leather, Pigmented leather, PU leather, Pull Up leather, Semi-aniline leatherThe COLOURLOCK Chill Bar helps to evenly press a repair grain onto the leather, and to quickly cool down the embossed area and remove dents. It has a flat side is for flat surfaces and a rounded side for curved surfaces.
