To maintain the surface, we recommend our Leather Protector. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces from colour fading and will make them supple once more.Amount: 150 ml. This is usually sufficient for the one-time treatment (minimum) of a complete car interior or a set of furniture.; 1litreApplication: Always test any products first on a hidden area in case they affect the colour!Use COLOURLOCK Leather Protector when the leather has dried completely from cleaning or colour refreshment, ideally on the following day. Apply with a soft cloth and let dry without polishing. One application is sufficient. Strained surfaces (heavy use or in sunlit areas) should be treated every three months. Clean before use to prevent dirt sticking to the surface.These products are also suitable for "Cool Leather/SRT (SunReflective Technology) Leather"!

Leather Shield protects new leather from wear marks and dirt.Application area: New smooth leather, pigmented or surface-coloured leather in cars, furniture, jackets and handbags. Do not use on porous leathers, suede, or nubuck. Application Always test any products first on a hidden area in case they affect the colour.Moisten a terry cloth slightly with COLOURLOCK Leather Shield, lightly wipe the moistend cloth over the leather and let dry. Do not buff or polish immediately after application. One application is sufficient. Repeat every three months on strained surfaces or heavily used areas. Prior to application, clean off any dirt with COLOURLOCK Mild or Strong Leather Cleaner.These products are also suitable for "Cool Leather/SRT (SunReflective Technology) Leather"!

Ideal for the care of leather which is exposed to the weather, or for conserving extremely dry or antique leather.Designed for treating genuine "Pull Up" furniture leather (oiled leather). Do not use on Bycast or polyurethane-coated (PU) leather.ApplicationAlways test any products first on a hidden area in case they affect the colour.Rub some preserver onto a clean, soft piece of cloth and apply to the leather. If required, use the cloth to give a final polish. The fat is difficult to use when it’s cold, so be sure to work at room temperature or warm it slightly with a hair dryer.COLOURLOCK Elephant Leather Preserver protects and waterproofs all types of nappa leather.

For the care and waterproofing of natural leather on suitcases, bags, straps or saddles, for motorcycle suits and other leather garments with nappa leather (the type where a drop of water rubbed in does not darken the leather), shoes, boots, greasy and oily leathers. Not suitable for suede and nubuck!Amount: 175 ml.Application areas: Leather ClothingFor: Pigmented leather Area of application COLOURLOCK Leather Care and Waterproofing Oil was specially developed by a tannery master. It makes dry leather supple again, protects it from weathering and makes it waterproof.Amount: 175 ml. This is usually sufficient for multiple treatments, even of larger surfaces.  Application Always test any products first on a hidden area in case they affect the colour.Apply sparingly and evenly, in a circular motion, with a sponge or piece of cloth. Do not dilute. If the leather is very dry, repeat the process. Treatment should be re-applied twice a year.

Leather hardens through age and also lack of care. If the leather has not been used for a long time the fibres will dry out through lack of movement. Heat also causes leather to shrink. Originally most vehicle leather was the processed vegetable tanned variety which hardens and shrinks at a temperature of about 70 °C (= 158°F). Today processed chrome-tanned hides are used which can withstand temperatures of around 90 °C (= 194°F). The less a leather is re-oiled through care, the lower the temperature at which it will start to shrink.  THE TREATMENT OF HARDENED LEATHERFirst clean the leather with COLOURLOCK Mild Leather Cleaner. Important: Too much moisture can damage antique leather so it is advisable to use a foam, rather than liquid, cleaner and remove the residue with a slightly damp cloth. . Allow to dry naturally and away from heat and sunlight.Next repair cracks and rips with COLOURLOCK Fluid Leather before treating with Leather Softener. This is important as Leather Softener is oil-based, making it difficult for repair products to be absorbed. Apply Leather Softener with a sponge or a soft cloth. For best results, the softener must be applied on the reverse side (the layer facing the cushions on the inside). Because the surface is rougher, it is more receptive to treatment than the smooth side. Unless you are planning on carrying out further upholstery repairs, you are advised not to remove the covers for this treatment as old leather can tear or break easily.Let the leather rest for 24 hours to allow time for it to fully absorb the Leather Softener, then repeat. One litre is sufficient for an entire vehicle area. For individual upholstery parts use 250 ml.Next try and loosen the fibres by kneading the leather with your hands. Continue until the leather feels softer. But be careful as very old and shrunken leather can break easily. While the leather will never be as soft as it once was, you should still see a noticeable improvement. Professionals use a leather-softening tool to soften the leather (see video).After the final application of Leather Softener remove the residue with a soft cloth and let the leather rest for a week before carrying out further treatment and repairs. Before using repair products thoroughly degrease the area with COLOURLOCK Degreaser.To nourish and protect the leather, use COLOURLOCK Leather Protector and, if the leather is glossy or exposed to the weather, COLOURLOCK Elephant Leather Preserver offers added protection. Depending on the level of use a care treatment should be applied once or twice a year. Further treatments with Leather Softenerare not necessary. Amount: 250 ml. This is usually sufficient for one or two seats and several handbags/smaller suitcases ; 1 litre

Faux Leather Protector and conditioner is ideal for use on synthetic leather, leatherette, PVC, vinyl and artificial surfaces dyed and treated to look like leather. Seals the surface and reduces soiling Protects the surface by reducing bleaching and brittleness Does not make the surface glossy Quantity sufficient to treat a whole car interior or furniture suite Amount: 150 ml, 1 litreApplication areas: Car Leather, Furniture LeatherFor: Artificial leatherCOLOURLOCK Faux Leather Protector and conditioner is ideal for use on synthetic leather, leatherette, PVC, vinyl and artificial surfaces dyed and treated to look like leather. It can also be used on plastic surfaces, such as car dashboards. Apply a thin layer with a soft piece of cloth and let dry without polishing. One layer is sufficient. Repeat every three months on strained surfaces. Clean before use to avoid soiling.

PU leather is cheaper than standard leather, which is what makes it attractive, but is not as durable. It relies on the polyurethane coating for stability. This coating makes the leather feel colder than standard leather and it is more likely to stick to the skin.The polyurethane coating requires special care – normal leather care products will not penetrate, while the classic wax and oil treatments will cause damage. PU leather is also very sensitive to contact from skin and hair and can easily crack, which is why it needs to be cleaned and maintained regularly.Use a lint-free dry or slightly damp cloth to dust the surface. Then, every 3 to 6 months, apply COLOURLOCK PU Protector gently with a soft cloth. This will remove dirt and keep the surface smooth and glossy.Deep scratches and abrasions are difficult to treat. Sometimes light scratches can be removed by heating with a hair dryer. The PU coating has to be heated well to remove the scratches. In most cases, the scratches disappear almost completely. But this has to be done with extreme caution as excessive heating can cause irreparable damage to the coating. It’s advisable to test first by making similar scratches – but not too deep – on a hidden area. Where possible, areas that come into contact with skin and hair should, in addition to regular cleaning and treatment with PU Protector, be protected by pillows and blankets. Damaged PU coatings (matt, sticky, rough or cracked) can rarely be repaired. The options are to have the PU leather replaced by an upholsterer or buy new furniture. 

PEOX is a water-based paste which dries transparently to create a durable protective film. It is used on invisible areas to prevent squeaking noises and reduce wear from friction. The product should be applied in a thin layer on contact areas using a piece of cloth. For visible areas, or on surfaces prone to rust, use LEISOL quiet cream. Noise in vehicles has decreased significantly by more modern engines and noise insulation systems. In contrast, the percentage of moving parts in the vehicle has increased considerably. The seats can be adjusted in many variations, cup holders, toggle switches, and much more can lead to disturbing creaking, squeaking or rattling noises. In many years of working with the luxury segment of the automotive industry, LEDERZENTRUM GmbH has developed a range of anti-friction coatings that successfully eliminates these noises. During the development of the LIP ANTI-FRICTION COATINGS, two universal products have been developed which are the first choice in noise reduction for workshops, customer services and consumers. Both products are easy to use, create a transparent, durable, elastic, protective film which doesn't bind soil particles. Another benefit is the reduction in wear and tear. Friction sounds are always a sign of wear and tear! THE PREPARATION First, find the source of the noise. Ask for help if the area is not easy to identify. Often it’s necessary to uncover the affected area. This may require disassembling parts. Clean the area before application. Use PEOX on invisible areas and LEISOL for visible but inaccessible parts. Rub some PEOX into a cloth and apply on the respective surfaces and let dry. Please note that PEOX can cause corrosive surfaces to rust. Also don’t apply on acrylic glass or safety-relevant parts like braking systems, etc. PEOX ANTI-FRICTION CREAM PEOX ANTI-FRICTION CREAM is a water-based paste which dries to a transparent and durable protective film. Areas of application: Rust-proof guide rails, lever guides, hinges, switches, threads. Contact materials: Plastic, artificial leather, leather and fabrics, including micro-fibre fabrics.Cleaning: Excess residue can be removed with a damp cloth moistened with hot water.

Elephant Leather Oil is a natural care product for all smooth leather It keeps the leather supple, water-repellent, and protects against aging Ecological base without chemical solvents and over 95% biodegradable Suitable for the care of leather jackets, motorcycle suits, car seats, shoes, and belts, as well as saddle, saddle gear, saddlebags In liquid form, it is particularly easy to apply at cooler temperatures and for very dry leather Our Elephant Leather Oil is a natural care product specifically designed for the care of smooth leather. It helps to keep the leather supple and soft, and protects and impregnates it against weather influences such as rain and sunlight. By applying the oil, the leather is also protected against aging. The formula is based on natural ingredients and contains no chemical solvents. Elephant Leather Oil is over 95% biodegradable, making it an environmentally friendly choice for leather care. It is suitable for the care of leather jackets, motorcycle suits, car seats, shoes, and belts, as well as saddle, saddle gear, and saddlebags. The liquid form is particularly useful at cooler temperatures, as oil is easier and more evenly applied to leather than leather grease. Elephant Leather Oil is also ideal for extremely dry leather that has not been cared for in a long time, has been exposed to the sun, or requires a lot of care. With regular use, the leather is protected and remains beautiful for longer. APPLICATION Always test all products for changes in an inconspicuous area first! Apply some leather oil to a cloth and apply it in a circular, even manner over the entire leather surface. Repeat if necessary for very dry leather. Depending on the use of the leather, the care should be repeated once or twice a year.

The leather sole oil is the ideal leather care product for welted shoes with leather soles. Leather soles come in contact with moisture and must be maintained accordingly. The leather sole oil keeps the leather flexible, waterproofs it and increases the abrasion resistance of the sole.Amount: 150 ml. One bottle is sufficient to treat several pairs of shoes several times.APPLICATIONShake before use.Break-in new soles first so that the fiber structure of the outersole gets a bit rough and becomes receptive to the product. When using for the first time, apply the leather sole oil sparingly and evenly two to three times without completely soaking the leather. Apply with a cloth or brush until the sole is saturated. Repeat one-coat application two to four times a year. Caution: Leather oil can cause stains on porous upper leather.Attention!• If there are visible seams on the leather sole, please skip this area so that no oil gets into the shoe.• Do not overapply! Avoid oversaturating the sole, so that the oil does not go inside the shoe.• Do not treat the sole edge to avoid oil stains on the upper leather.• Porous leather soles are more sensitive to weather than rubber soles. Therefore wear weather-resistant footwear for snow and continuous rain instead of leather soled shoes.• This product is designed for outer shoe soles, it is not suitable for insoles.

LEISOL Quiet Cream prevents creaking noises and reduces wear caused by friction. LEISOL is a liquid lubricating varnish in a pump spray bottle. It can be applied to exposed surfaces and, because of its liquid nature, it is also easy to use in inaccessible areas. For rustproof and non-visible surfaces, use PEOX antifriction coating.Noise in vehicles has decreased significantly by more modern engines and noise insulation systems. In contrast, the percentage of moving parts in the vehicle has increased considerably. The seats can be adjusted in many variations, cup holders, toggle switches, and much more can lead to disturbing creaking, squeaking or rattling noises. In many years of working with the luxury segment of the automotive industry, LEDERZENTRUM GmbH has developed a range of anti-friction coatings that successfully eliminates these noises. During the development of the LIP ANTI-FRICTION COATINGS, two universal products have been developed which are the first choice in noise reduction for workshops, customer services and consumers. Both products are easy to use, create a transparent, durable, elastic, protective film which doesn't bind soil particles. Another benefit is the reduction in wear and tear. Friction sounds are always a sign of wear and tear!